Siemens SINAMICS DCM Manual page 226

7.4 Terminal Module TM31
7.4.1 Description
The Terminal Module TM31 is a terminal expansion that is snapped onto a EN 60715
standard mounting rail. Terminal Module TM31 can be used to increase the number of
available digital inputs/digital outputs and also the number of analog inputs/analog outputs
within a drive system.
The TM31 contains the following interfaces:
Table 7- 24
Type
DRIVE-CLiQ interfaces
Digital inputs
Bidirectional digital inputs/outputs
Analog inputs
Analog outputs
Relay outputs
Temperature sensor input
Supported types
The SINAMICS DC MASTER only supports one version of the Terminal Module TM31:
Table 7- 25
TM31 article number
6SL3055-0AA00-3AA0
6SL3055-0AA00-3AA1
7.4.2 Safety instructions
WARNING
Danger to life through non-observance of the safety instructions
If the safety instructions in Chapter 1 are not observed, accidents can occur involving
severe injuries or death.
• Make sure that the safety instructions are observed.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Interface overview of the TM31
TM31 types
Use with SINAMICS DC MASTER
Not possible
Possible
ac.maher.co.ir
Additional system components
7.4 Terminal Module TM31
Quantity
2
8
4
2
2
2
1
227