Siemens SINAMICS DCM Manual page 324

Operation
9.1 Basic information
9.1.1 Parameter
Parameter types
The following adjustable and display parameters are available:
● Adjustable parameters (can be written and read)
These parameters have a direct effect on how a function responds.
Example: Ramping time of a ramp-function generator
● Display parameters (can only be read)
These parameters are used to display internal variables.
Example: Actual motor current
Figure 9-1
All these drive parameters can be read via PROFIBUS and changed by means of p
parameters using the mechanisms defined in the PROFIdrive profile.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Parameter types
ac.maher.co.ir
9
325