Siemens SINAMICS DCM Manual page 279

Commissioning
8.4 Commissioning with the STARTER commissioning tool
Figure 8-12
⇒ Click Continue > to set up a drive device in the project wizard.
Figure 8-13
⇒ Select the following data from the list fields:
Unit:
Type:
280
Setting the interface
Inserting a drive unit
SINAMICS DCM
Standard CUD /
Advanced CUD, if you have purchased Option G01
Standard CUD [2] for a Standard CUD in the right-hand slot
Advanced CUD [2] for a Advanced CUD in the right-hand slot
ac.maher.co.ir
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001