Siemens SINAMICS DCM Manual page 5

Preface
Note
Hardware/software compatibility
The hardware version of the Control Unit (CUD) must be taken into account when updating
the device software. See the table below.
The hardware version can be read from the label on the right-hand side of the CUD.
CUD (print on label)
C98043-A7100-L1-...
C98043-A7100-L2-...
C98043-A7100-L100-...
C98043-A7100-L200-...
C98043-A7100-L3-...
C98043-A7100-L4-...
C98043-A7100-L103-...
C98043-A7100-L204-...
A5E...
SINAMICS DCM documentation available
SINAMICS DCM DC Converters Operating Instructions
contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM Control Modules Operating Instructions
contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM List Manual (for DC converters and control modules)
Contains
parameter list, function diagrams, list of faults and alarms
SINAMICS free function blocks, function description
Includes a general description, list of parameters, the function block diagrams as well as
the list of faults and alarms.
SINAMICS DCM DVD documentation
Includes
All the manuals listed above, in all of the available languages
Function diagrams in VISIO® format
Application notes
Spare parts list
6
Executable software versions
1.1, 1.2, 1.3
All versions
All versions
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter