Maintenance
11.2 Replacing components
Replacing fans in 210 to 280 A devices
Unlatch the fan cover at the top left and right
•
Tilt the fan cover around 30° and pull it out towards you
•
Disconnect the fan connector
•
Replace the fans.
•
Make sure you install the new fans in the correct position:
•
The air must be blown upwards (see the arrow on the fan enclosure).
Reconnect the fan connector and replace the fan cover.
•
Figure 11-4
Replacing fans in 210 - 280 A devices
660
①
.
②
③
.
ac.maher.co.ir
.
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
SINAMICS DCM DC Converter