Siemens SINAMICS DCM Manual page 496

10.7 EtherNet/IP
10.7.1 Connection of SINAMICS DCM with EtherNet/IP to Ethernet networks
The SINAMICS DC MASTER version with option G20/G21 (CBE20 Communication Board
left/right) is required for the connection to EtherNet/IP. See Chapter Ordering information for
options and accessories (Page 30) for ordering data.
For further details on the CBE20 module, see Chapter Option Board: Communication Board
Ethernet CBE20 (Page 190).
Picture left:
Picture right:
Figure 10-49 CBE20
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Communication Board Ethernet CBE20 inserted in the option module slot
Advanced CUD
Maximum configuration with two CBE20. Four Ethernet cables
ac.maher.co.ir
Descriptions of functions
10.7 EtherNet/IP
①
of an
②
for each CBE20.
497