Siemens SINAMICS DCM Manual page 609

Descriptions of functions
10.33 Diagnostics
1. In STARTER, click the
The "Trace" parameterizing screen form is then displayed.
Figure 10-98 Multiple trace in STARTER
2. Activate the "Save recording in the device" checkbox.
3. Enter the number of cycles in the "Number of recordings" field.
Note
Detailed information on how to parameterize and operate the trace function is available in
the STARTER online help in Chapter "Trace, measuring functions and automatic
controller setting".
4. Make the required trace settings and save the settings.
610
symbol (device trace-function generator).
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter