Siemens SINAMICS DCM Manual page 464

In the dialog screen that appears next, enter a freely selectable device name, the IP address
and the subnet mask.
The subnet masks must match before STARTER can be operated.
Figure 10-39 STARTER - Edit Ethernet node
After selecting the "Assign name" button, the following confirmation will appear if the
assignment was successful: In certain cases, a RAM to ROM is executed in the drive and
you must wait until it has been completed.
Figure 10-40 STARTER - Successful assignment of the device name
After selecting the "Assign IP configuration" button, the following confirmation will appear if
the assignment was successful: In certain cases, a RAM to ROM is executed in the drive
and you must wait until it has been completed.
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
Descriptions of functions
10.5 Communication via PROFINET IO
465