Siemens SINAMICS DCM Manual page 30

Table 2- 4 Additional options
Option
Terminal Module Cabinet (TMC)
Can be snapped onto a 35 mm mounting rail.
Enables the simple connection of the CUD standard signals (X177) via spring-loaded termi-
nals in an easily accessible area of the control cabinet.
The CUD is equipped with an adapter board. Terminal Module Cabinet and connecting cable
(3 m) are supplied separately.
Notes:
In the device version with option G63, the X177 terminal connections are no longer avail-
•
able directly on the CUD.
When ordering, please specify which CUD (in the left or right slot) is to be equipped with
•
the option.
If two CUDs are to be equipped with option G63, the option must be ordered for each
•
CUD.
Armature infeed with extra-low voltage 10 V to 50 V
(possible for devices with rated supply voltage ≤575 V
Electronic power supply for connection to 24 VDC
Sensor for the air intake temperature
Possible as of software release 1.3 HF1
Coated modules
Coated modules increase the degree of ruggedness with respect to climatic effects:
Relative / absolute humidity 5% to 95% / 1 to 29 g/m
medium temperature ≤30° C
≤ 60% with the occurrence of SO
um temperature 30° C to 40° C
Oil mist, salt mist, formation of ice, condensation, dropping, spray, splashing and jet-water not
permissible.
Nickel-plated copper bars
(for devices with aluminum bars as standard, use of nickel-plated copper bars)
Control for switching over the power unit topology for devices connected in parallel and series
This option is described in the application document "12-pulse applications".
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
for ambient temperature or cooling
3
and H S and/or for ambient temperature or cooling medi-
2 2
ac.maher.co.ir
Type spectrum, ordering information
2.4 Ordering information for options and accessories
Order codes
G63
L04
L05
L15
M08
M10
S50
31