Siemens SINAMICS DCM Manual page 505

Descriptions of functions
10.7 EtherNet/IP
The "Generic Ethernet Module" is selected at Communication:
Figure 10-53 Selection of the module (2)
Figure 10-54 Selection of the module (3)
● After the module has been inserted by clicking OK, a new Ethernet/IP slave appears in
the structure tree.
By double-clicking or right-clicking and then selecting "Properties", the following window
opens.
506
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
SINAMICS DCM DC Converter