Siemens SINAMICS DCM Manual page 4

Preface
Note
Information on connecting the device
The inside front cover of the SINAMICS DC MASTER Operating Instructions contains a
summary of the key information required for connecting the device.
Product name
The SINAMICS DCM documentation uses the following product names:
● SINAMICS DCM
● SINAMICS DC MASTER
Device software version
When these operating instructions went to print, SINAMICS DCM devices were being
supplied from the factory with the software release specified on Page 3.
However, these Operating Instructions can, in principle, also apply to other software
versions.
● Older software versions:
It is possible that not all of the functions described here may be available.
● Newer software versions:
It is possible that the SINAMICS DCM may feature additional functions that are not
described in these Operating Instructions. Do not change any parameters that you cannot
find in the List Manual from their factory setting, and do not give parameters any values
that are not specified in the List Manual.
The software release is displayed using r50060[6].
Example:
01010203 displayed on the BOP20 means 01.01.02.03 → Version 1.1, Service Pack 2, Hotfix
3
When required, you can obtain the current software from your local Siemens sales office.
Download of the current software version for registered users
(https://support.industry.siemens.com/cs/ww/en/view/44029688)
SINAMICS DCM DC Converter
Operating Instructions, 02.2015, A5E34763375/RS-AA/001
ac.maher.co.ir
5