Siemens SINAMICS DCM Manual page 221

Dc converter

Hide thumbs Also See for SINAMICS DCM:

Additional system components

7.3 Terminal Module TM15

Installation

1. Tilt the component backwards slightly and snap it onto the mounting rail using the hook.

2. Push the component towards the mounting rail until you hear the mounting slide at the

rear latch into position.

3. You can now move the component to the left or right along the mounting rail, until it

reaches its final position.

1. The lug on the mounting slide must first be pushed down to release the interlock from the

mounting rail.

2. The component can now be tilted towards the front and removed from the mounting rail.

Mounting slide

Standard mounting rail

Removing from a mounting rail

ac.maher.co.ir

SINAMICS DCM DC Converter

Operating Instructions, 02.2015, A5E34763375/RS-AA/001