Erase Factory-Default - Allied Telesis IE220 Series Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
ERASE FACTORY DEFAULT

erase factory-default

Overview This command erases all data from flash except the following:
•
•
•
The device is then rebooted and returned to its factory default condition. The
device can then be used for AMF automatic node recovery.
erase factory-default
Syntax
Mode Privileged Exec
Usage notes This command is an alias to the
Example To erase data, use the command:
Node_1#
This command will erase all NVS, all flash contents except for
the boot release, a GUI resource file, and any license files,
and then reboot the switch. Continue? (y/n):y
Related atmf cleanup
commands
C613-50644-01 Rev B
C
OMMANDS
the boot release file (a .rel file) and its release setting file
all license files
the latest GUI release file
erase factory-default
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
atmf cleanup command.
128