Erase Factory-Default - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
ERASE FACTORY DEFAULT

erase factory-default

Overview This command erases all data from NVS and all data from flash excluding the
following:
•
•
•
The device is then rebooted and returned to its factory default condition. The
device can then be used for AMF automatic node recovery.
erase factory-default
Syntax
Mode Privileged Exec.
Usage This command is an alias to the
Note that this command can only be used on standalone switches, not stacked
switches.
Example To erase data, use the command:
Node_1#
This command will erase all NVS, all flash contents except for
the boot release, and any license files, and then reboot the
switch. Continue? (y/n):y
Related atmf cleanup
Commands
613-50157-01 Rev C
C
OMMANDS
the current release file
the backup release file
license files
erase factory-default
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
atmf cleanup command.
98