What's New In Digi Lr54 Version 22.8 - Digi LR54 User Manual

What's new in Digi LR54 version 22.8

Release of Digi LR54 firmware version 22.8:
Cellular modem enhancements:
n
Added modem ota download and system firmware ota download commands for
l
downloading cellular modem and device firmware.
Added cellular carrier name and PLMN ID to the Modems Status page in the Web UI.
l
Enhanced access technology options to set the modem to 5G-only, including setting to 5G
l
SA-only, NSA-only, or both NSA/SA-modes.
VPN enhancements:
n
Added Dynamic Multipoint VPN (DMVPN) support.
l
Added a Strict routing setting to IPsec tunnels that routes packets through the tunnel if
l
both the source IP and destination IP match the IPsec tunnel's policies. This makes IPsec
behave like a policy-based VPN, rather than a route-based VPN.
Added the Microsoft version of the Challenge-Handshake Authentication Protocol (MS-
l
CHAPv2) as an option for L2TP network servers authentication methods.
Container support:
n
Container support now a premium feature, enabled through Digi Remote Manager.
l
Added new metrics for sending container status, name, CPU load, and disk usage as
l
datapoints to DigiRM.
Added support for running a PPPoE server when an interface is in IP passthrough mode.
n
Added ability to specify DFS channels for Wi-Fi client background scanning when DFS client
n
support is enabled.
Added a show eth Admin CLI command to show the link status of each Ethernet port.
n
Added a poweroff CLI command to perform a graceful shutdown of the device without
n
automatically rebooting.
LR54 User Guide 21