Dresspack Floor; Installation Of Dresspack Floor - ABB DressPack IRB 6620LX Product Manual

2.5 DressPack floor

2.5.1 Installation of DressPack floor

Configuration and connections of DressPack floor
The DressPack floor is made up of several components. Some of these components
are specific to DressPack / SpotPack application, while others are used also in
other applications.
The configuration of the components differs between different application types.
Types of application
Some typical applications are specified below:
Type of ap-
plication
H
S
HS
Se
HSe
Connection points
The cables and connections points between the components are all detailed and
illustrated in the circuit diagram for the current application. See references to the
circuit diagrams in
Required equipment
Equipment, etc.
DressPack floor
Standard Toolkit,
DressPack/SpotPack
Reference documents
Document
Circuit diagram - DressPack
6620
Product manual - DressPack/SpotPack IRB 6620LX
3HAC055327-001 Revision: A
Description
Pneumatic gun
Material handling and
pneumatic gun
Servo gun
Material handling and
servo gun
Reference documents on page
Article number
For spare part number
see chapter:
• Spare parts on
page 113.
3HAC17290-7
Document number
3HAC026136-001
© Copyright 2016-2017 ABB. All rights reserved.
2.5.1 Installation of DressPack floor
Example of included components
Robot, single cabinet controller
Robot, single cabinet controller, water and air unit
Robot, single cabinet controller, spot welding cab-
inet, water and air unit, pedestal gun
Robot, single cabinet controller, spot welding cab-
inet, water and air unit
Robot, single cabinet controller, spot welding cab-
inet, water and air unit, pedestal gun
79.
Note
A number of versions are available.
The contents are defined in section
Toolkits, DressPack/SpotPack on page
Note
Continues on next page
2 Installation
111.
79