Loading Media In The 1- Or 2-Tray Oversized High Capacity Feeder (Ohcf / Trays 6 And / Or 7); Postcard Bracket - Xerox Versant 80 Press User Manual

6. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray settings screen may be
displayed on the UI.
7. If changes have been made to the paper tray, select the Change Settings button;
otherwise, proceed to the next step.
a) Make the desired selections for Paper Type/Paper Weight, Paper Size, and
Paper Color.
b) If necessary, make the desired changes to paper curl and alignment adjustment.
Note
Refer to the System Administration Guide for detailed information on the paper
curl and alignment adjustment options.
c) Select Save until you are returned to the tray settings window.
8. Select Confirm to close the window.
Loading Media in the 1- or 2-Tray
Oversized High Capacity Feeder (OHCF /
Trays 6 and / or 7)
Note
Each feeder tray has a stock loading label. When loading media into the tray, refer to
the labels on the inside panel of the feeder tray for the correct orientation of that stock
type.
Note
It is recommended that you use the Bypass Tray (Tray 5) to feed envelopes. However,
if you use Trays 6 and / or 7, C5 and #10 envelopes must be fed SEF with the Postcard
Bracket installed. Stack height is limited to 200 envelopes.

Postcard Bracket

The Postcard bracket is delivered with the OHCF from manufacturing. The Postcard
bracket allows you to print on smaller size media without requiring post-processing
cutting or sorting. The Postcard bracket specifically accommodates 4 x 6 in. (101.6 x
152.4 mm) SEF media.
® ®
Xerox Versant 80 Press
User Guide
Paper and Media
3-9