Display Ip Routing-Table Verbose - Huawei Quidway S8500 Series Command Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches

1.1.10 display ip routing-table verbose

Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Use the display ip routing-table verbose command to view the verbose routing table
information.
With the verbose keyword, this command displays the verbose routing table
information. The descriptor describing the route state will be displayed first, then the
statistics of the entire routing table will be output and finally the verbose description of
each route will be output.
All current routes, including inactive route and invalid route, can be displayed using the
display ip routing-table verbose command.
Example
# Display the verbose routing table information.
<Quidway> display ip routing-table verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Destinations: 3
Holddown: 0
**Destination: 1.1.1.0
**Destination: 1.1.1.1
**Destination: 2.2.2.0
Routes: 3
Delete: 62
Protocol: #DIRECT
*NextHop: 1.1.1.1
State: <Int ActiveU Retain Unicast>
Age: 20:17:41 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42 Cost: 0/0
Protocol: #DIRECT
Huawei Technologies Proprietary
Chapter 1 Static Route Configuration Commands
Hidden: 0
Mask: 255.255.255.0
Preference: 0
Interface: 1.1.1.1(Vlan-interface1)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.255.255.0
Preference: 0
1-15
* = Next hop in use