Huawei Quidway S8500 Series Command Manual page 305

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Description
Use the display rip command to view the current RIP running state and its
configuration information.
Example
# Display the current running state and configuration information of the RIP.
<Quidway> display rip
RIP is running
public net VPN-Instance
Checkzero is on
Summary is on
Traffic-share is off
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :
202.38.168.0
Table 2-1 Description of the fields of the display rip command
RIP is running
public net VPN-Instance
Checkzero is on
Default cost : 1
Summary is on
Preference : 100
Traffic-share is off
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :202.38.168.0
Default cost : 1
Preference : 100
Field
Huawei Technologies Proprietary
2-3
Chapter 2 RIP Configuration Commands
Description
RIP is active
Public network in the VPN
Enable zero field checking
The default route cost is 1
Routes are summarized automatically
The preference of RIP is 100
Load balancing state for the interface
Three timers of RIP
No destination address
transmission is specified
Enable RIP on network
202.38.168.0
of a
segment