Chrysler Conquest 1988 Service Manual page 1247

AUTOMATIC TRANSMISSION
- Control Valve Bodv
21-125
Pressure
regulator sleeve
Pressure regulator plug
Pressure regulator valve
?k 3rd-4th shift plug
2nd-3rd shift valve
Vacuum throttle valve
3rd-4th shift valve
3rd-4th shift sleeve
Side plate "A" Thrott
JATI 25
1. Assemble side plate A group of parts into lower valve body.
Reinstall side plate and finger tighten screws.
Assemble side plate B group and side plate C group in same
manner as A group.
-
2. Tighten screws.
Side plate to valve body: 2.5 - 3.4 Nm (1.8 - 2.5 ft.lbs.)
JAT126
3. Install orifice check valves, valve springs, throttle relief
valve spring and steel ball in valve body.
4. Install 3-2 timing valve and spring.
Valve spring 3-2 timing valve
.lAT137