Chrysler Conquest 1988 Service Manual page 1252

-____
WHEELS AND TIRES
- Service Adjustment Procedures
SERVICE ADJUSTMENT PROCEDURES
N22FDAB
TIRE INFLATION PRESSURE CHECK
'I. Check the inflation pressure ot the trres.
2. If it is not within the specrtred tire rnflatron pressure, make I
the necessary adlustment;
TIRE WEAR
N22FElAA
1. Measure thetread depth of tires.
Limit: 1.6 mm (.06 in.)
2. If the remaining tread depth is less than the service limit, ._
replace the tire.
.~
NOTE
I?
When the tread depth of tires is reduced to 1.6 mm (.06 in.)
or less, wear indicators mill appear.
WHEEL RUNOUT
NZZFCAA
1. Jack up the vehicle so thatthe wheels are clear of the floor.
2. While slowly turning the wheel, measure wheel runout with z
a dial indicator--~
3. If wheel runout exceeds-the service limit, re$ace the T
wheel.
-
Limit:
Radial 3.0 mm (.I2 in.)
Lateral
3.0
mm (.I2 in.)