Main Harness - Subaru Legacy 2002 Service Manual

7. Main Harness

A: REMOVAL
S802310A18
1) Turn ignition switch OFF.
2) Disconnect the ground cable from the battery
and wait for at least 20 seconds before starting
work.
3) Remove instrument panel. <Ref. to EI-35,
REMOVAL, Instrument Panel Assembly.>
4) Disconnect connector from airbag control mod-
ule.
5) Disconnect front sub sensor connector (blue)
from airbag main harness.
MAIN HARNESS
S802310
B5M0682
B5M0684
AB-15
6) Detach clips from steering support beam, and
remove main harness.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Check for the following, and replace damaged
parts with new parts.
¼ Harness and/or connector is damaged.
Airbag System
B5M0678A
S802310A11
S802310A10