Side Turn Signal Light - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

SIDE TURN SIGNAL LIGHT

Lighting System

25. Side Turn Signal Light

1) Disconnect ground cable from battery.

2) Pull out the light from body while pushing it in

direction of vehicle front.

3) Disconnect harness connector and remove the

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1) Visually check the bulb for blow out.

2) Check the bulb specification. <Ref. to LI-2,

SPECIFICATIONS, General Description.>

3) If NG, replace the bulb with a new one.

Table of Contents