Subaru Legacy 2002 Service Manual page 2827

Seat Belt System
B: INSTALLATION
1. OUTER BELT SIDE (SEDAN BODY)
S801304A1101
Install in the reverse order of removal.
CAUTION:
¼ During installation, make sure that seat belts
are not twisted.
¼ After installation, make sure that seat belts
can be smoothly extended and wound.
2. OUTER BELT CENTER (SEDAN BODY)
S801304A1102
Install in the reverse order of removal.
CAUTION:
¼ During installation, make sure that seat belts
are not twisted.
¼ After installation, make sure that seat belts
can be smoothly extended and wound.
3. INNER BELT (SEDAN BODY)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that seat belts
are not twisted.
4. OUTER BELT SIDE (WAGON BODY)
S801304A1104
Install in the reverse order of removal.
CAUTION:
¼ During installation, make sure that seat belts
are not twisted.
¼ After installation, make sure that seat belts
can be smoothly extended and wound.
5. OUTER BELT CENTER (WAGON BODY)
S801304A1105
Install in the reverse order of removal.
CAUTION:
¼ During installation, make sure that seat belts
are not twisted.
¼ After installation, make sure that seat belts
are smoothly extended and wound.
6. INNER BELT (WAGON BODY)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that seat belts
are not twisted.
REAR SEAT BELT
S801304A11
S801304A1103
S801304A1106
SB-12
Tightening torque:
Refer to COMPONENT in General
Description. <Ref. to SB-3, REAR SEAT
BELT (SEDAN BODY), COMPONENT,
General Description.> or <Ref. to SB-4,
REAR SEAT BELT (WAGON BODY),
COMPONENT, General Description.>
C: INSPECTION
1. OUTER BELT SIDE (SEDAN BODY)
S801304A1001
Check for the following, and replace with new parts
if necessary.
¼ Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. OUTER BELT CENTER (SEDAN BODY)
S801304A1002
Check for the following, and replace with new parts
if necessary.
¼ Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
3. INNER BELT (SEDAN BODY)
Check for the following, and replace with new parts
if necessary.
¼ Inner belt is deformed or damaged.
¼ Seat belt buckle is engaged improperly.
4. OUTER BELT SIDE (WAGON BODY)
S801304A1004
Check for the following, and replace with new parts
if necessary.
¼ Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
5. OUTER BELT CENTER (WAGON BODY)
S801304A1005
Check for the following, and replace with new parts
if necessary.
¼ Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
6. INNER BELT (WAGON BODY)
Check for the following, and replace with new parts
if necessary.
¼ Inner belt is deformed or damaged.
¼ Seat belt buckle is engaged improperly.
S801304A10
S801304A1003
S801304A1006