Subaru Legacy 2002 Service Manual page 2882

Hide thumbs Also See for Legacy 2002:

Table of Contents

11. Rear Washer Nozzle

1) Remove the high-mount stop light. <Ref. to

LI-27, REMOVAL, High Mount Stop Light.>

2) Remove the washer hose from the washer

3) Open the clips on the underside of the hood

with a thin screwdriver or other tool, and remove

the washer nozzle.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust the position of the washer liquid sprayer.

<Ref. to WW-17, ADJUSTMENT, Rear Washer

C: INSPECTION

¼ Make sure the nozzle and hose are not clogged.

¼ Make sure the hose is not bent.

D: ADJUSTMENT

1) Turn wiper switch to OFF position.

2) When vehicle stops, adjust washer injection

position as shown in the figure.

Injection position:

A: 60 mm (2.36 in)

REAR WASHER NOZZLE

Wiper and Washer Systems

Chapters

Table of Contents