Subaru Legacy 2002 Service Manual page 2842

10. Combination Switch (Light)
S914411
A: REMOVAL
S914411A18
1) Disconnect ground cable from battery.
2) Remove instrument panel lower cover. <Ref. to
EI-35, REMOVAL, Instrument Panel Assembly.>
3) Remove screws which secure upper column
cover to lower column cover.
4) Disconnect connector from combination switch.
5) Remove screws which secure switch and
remove switch.
B: INSTALLATION
Install in the reverse order of removal.
COMBINATION SWITCH (LIGHT)
B6M1184
S6M0046
S914411A11
C: INSPECTION
Measure combination switch resistance.
1. LIGHTING SWITCH
LHD model and RHD model with rear fog light:
Switch position
OFF
Tail
Head
RHD model without rear fog light:
Switch position
OFF
Tail
Head
2. DIMMER AND PASSING SWITCH
LHD model and RHD model with rear fog light:
Switch position
Passing
Low beam
High beam
RHD model without rear fog light:
Switch position
Passing
Low beam
High beam
LI-11
Lighting System
S914411A10
B6M1560A
S914411A1001
Terminal No. Standard
— More than 1 MΩ
Less than 1 Ω
14 and 16
Less than 1 Ω
13, 14 and 16
Terminal No. Standard
— Moe than 1 MΩ
Less than 1 Ω
9 and 15
Less than 1 Ω
9, 14 and 15
Terminal No. Standard
Less than 1 Ω
7, 8 and 16
Less than 1 Ω
16 and 17
Less than 1 Ω
7 and 16
Terminal No. Standard
Less than 1 Ω
1, 2 and 9
Less than 1 Ω
9 and 10
Less than 1 Ω
2 and 9
S914411A1002