Subaru Legacy 2002 Service Manual page 2973

Instrumentation/Driver Info
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
¼ Make sure that electrical connector is con-
nected securely.
¼ Make sure that each meter operates nor-
mally.
C: DISASSEMBLY
CAUTION:
Use gloves to avoid damage and getting finger-
prints on the glass surface and meter surfaces.
1. NORMAL METER
1) Disengage claw (F) to remove case (B) from
back cover (A).
2) Disengage claw (G) to remove meter glass (E),
reflector (D), and window plate (C) from inner case.
3) Pull up claw (A) in portion (B) of printed circuit
(C) with combination pliers. Push out speedometer
assembly (D) and tachometer assembly (E) using
hole (F).
4) Pull up claw in the center of printed circuit (C),
and remove printed circuit from case (G).
COMBINATION METER ASSEMBLY
S907335A11
S907335A06
S907335A0602
B6M1207A
B6M1422A
IDI-16