Subaru Legacy 2002 Service Manual page 2852

18. Rear Finisher Light
Assembly
S914429
A: REMOVAL
S914429A18
1. SEDAN
S914429A1801
1) Disconnect ground cable from battery.
2) Open the trunk lid.
3) Remove cover (A).
4) Disconnect connector (B) from rear finisher
light.
5) Remove ten nuts and then detach rear finisher
light from trunk lid.
2. WAGON
S914429A1802
1) Disconnect ground cable from battery.
2) Remove rear gate lower trim. <Ref. to EI-47
REMOVAL, Rear Gate Trim.>
3) Remove rear gate trim lower (A).
4) Disconnect connector from rear finisher light.
REAR FINISHER LIGHT ASSEMBLY
B6M1293A
B6M1191A
LI-21
5) Remove nuts (A) and then remove rear finisher
light from rear gate.
B: INSTALLATION
Install in the reverse order of removal.
Lighting System
B6M1541A
S914429A11