Subaru Legacy 2002 Service Manual page 2892

8. Antenna
S901463
A: INSPECTION
Measure resistance between antenna terminal and
each antenna wire.
If an antenna wire is OK, resistance will be less
than 1 Ω. If an antenna wire is broken, resistance
will be more than 1 MΩ.
NOTE:
When checking continuity, wind a piece of tin foil
around the tip of the tester probe and press the foil
against the wire with your finger.
To locate the broken point, move the probe along
the antenna wire.
S901463A10
B6M1494A
B6M1495
ANTENNA
B: REPAIR
1) Clean antenna wire and the surrounding area
with a cloth dampened by alcohol.
2) Paste a thin masking film on glass along the
broken wire.
3) Deposit
(DUPONT NO. 4817) on the broken portion with a
drawing pen.
4) Dry out the deposited portion.
5) After repair has been completed, measure
resistance in the repaired wire.
ET-9
S901463A19
conductive silver
Entertainment
composition
G6M0138