Subaru Legacy 2002 Service Manual page 2763

Hide thumbs Also See for Legacy 2002:

Table of Contents

HVAC System (Heater, Ventilator and A/C)

8. Blower Motor Assembly

1) Disconnect ground cable from battery.

2) Remove glove box. <Ref. to EI-32, Glove Box.>

3) Remove mounting bolts of harness stay.

4) Remove nuts of keyless unit stay and CRU unit

5) Disconnect connector of sunroof.

6) Disconnect servo connector.

BLOWER MOTOR ASSEMBLY

7) Disconnect motor connector.

8) Remove 3 screws.

9) Disconnect aspirator pipe (A) and remove

blower motor.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

Connect motor connector terminal 1 from the bat-

tery to the positive (+) lead and terminal 2 to the

negative (−) lead. Make sure the motor runs

Chapters

Table of Contents