Subaru Legacy 2002 Service Manual page 2974

2. LUMINESCENT METER
1) Remove screw (K) and disconnect connectors,
detach CFL (Cold Cathode Fluorescent Light)
inverter (J).
2) Unfasten CFL harness (I) from back cover
groove.
3) Disengage claw (M) to remove meter glass (F),
reflector (G), and window plate (E) from case (C).
4) Remove connector cover and release connec-
tor lock by pulling both end of it, disconnect FPC
(Flexible Printed Circuit) connector (P).
5) Pull up claw (N) on back cover (A) with combi-
nation pliers.
6) Push out speedometer assembly (H) and
tachometer assembly (D) using hole (O).
7) Disengage claw (L) to remove case (C) from
back cover (A).
COMBINATION METER ASSEMBLY
S907335A0604
B6M1625A
IDI-17
8) Pull up claw in center of printed circuit (B),
remove printed circuit from case (C).
Instrumentation/Driver Info
B6M1624A