Subaru Legacy 2002 Service Manual page 2942

2. Datum Points
A: LOCATION
S906540A13
NOTE:
¼ Datum points are specified for body repair.
¼ Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment
accuracy.
¼ Both right and left reference points are symmetrical.
1. ROOM SECTION
(13) Front fender attaching hole at
front pillar center portion M6
(14) Front fender attaching hole at
front pillar lower portion M6
(19) Retainer attaching hole at side
rail outer 3.2 mm (0.126 in) dia.
(20) Center pillar outer hole 14 mm
(0.55 in) dia.
(21) Front seat belt adjust plate
attaching hole M10
(22) Side sill outer hole 20 mm (0.79
in) dia.
DATUM POINTS
S906540
S906540A1301
(23) Rear quarter outer door switch
attaching hole 20 mm (0.79 in)
dia.
(64) Center pillar (LWR) gauge hole
13 mm (0.51 in) dia.
(81) Rear shelf (UPR) center hole 8
mm (0.31 in) dia.
(82) Rear side bulk head (UPR)
gauge hole 7 mm (0.28 in) dia.
(85) Rear quarter outer gauge hole
20 mm (0.79 in) dia.
BS-3
Body Structure
(87) Six light upper retainer attaching
hole 6.2 mm (0.244 in) dia.
(88) Retainer attaching square hole
at side rail outer 8 × 8 mm (0.31
× 0.31 in)
(89) Retainer attaching square hole
at rear quarter outer 8 × 8 mm
(0.31 × 0.31 in)
(92) Rear shelf (UPR) hole 6 mm
(0.24 in) dia.
B5M0847A