Subaru Legacy 2002 Service Manual page 2833

Lighting System
1. General Description
Headlight
Front turn signal light
Side turn signal light
Parking light
Front fog light
Rear fog light
Rear combination light
License plate light
High-mounted stop light
Room light
Spot light
Luggage room light
Trunk room light
Glove box light
B: PRECAUTIONS
¼ Before disassembling or reassembling parts,
always disconnect battery ground cable. When
replacing radio, control module, and other parts
provided with memory functions, record memory
contents before disconnecting the battery ground
cable. Otherwise, the memory will be erased.
¼ Reassemble in reverse order of disassembly,
unless otherwise indicated.
¼ Adjust parts to the given specifications.
¼ Connect connectors and hoses securely during
reassembly.
C: PREPARATION TOOL
1. GENERAL TOOLS
TOOL NAME
Circuit Tester
GENERAL DESCRIPTION
S914001
Tail/Stop light
Turn signal light
Back-up light
Sedan
Wagon
S914001E59
S914001A17
S914001A1701
A: SPECIFICATIONS
12 V — 55 W/55 W (Halogen)
12 V — 21 W
12 V — 55 W
12 V — 21 W
12 V — 5/21 W
12 V — 21 W
12 V — 21 W
12 V — 21 W
12 V — 10 W
12 V — 13 W
12 V — 1.4 W
¼ After reassembly, make sure functional parts
operate smoothly.
WARNING:
¼ Airbag system wiring harness is routed near
electrical parts and switches. All airbag system
wiring harnesses and connectors are yellow.
Do not use electric test equipment on these
circuits.
¼ Be careful not to damage the airbag system
wiring harness when servicing electrical parts
and switches.
Used for measuring resistance and voltage.
LI-2
S914001E49
12 V — 5 W
12 V — 5 W
12 V — 5 W
12 V — 8 W
12 V — 8 W
12 V — 5 W
REMARKS