Subaru Legacy 2002 Service Manual page 2855

REAR TURN SIGNAL LIGHT BULB
Lighting System
21. Rear Turn Signal Light Bulb
S914421
A: REMOVAL
S914421A18
1. SEDAN
S914421A1801
1) Open trunk lid and remove cover.
B6M1501A
2) Turn the socket and remove the bulb.
2. WAGON
S914421A1802
1) Remove rear combination light assembly. <Ref.
to LI-20, WAGON, REMOVAL, Rear Combination
Light Assembly.>
2) Remove the light cover mounting screws then
detach the cover.
3) Turn the socket and remove the bulb.
B6M1477
B: INSTALLATION
S914421A11
Install in the reverse order of removal.
C: INSPECTION
S914421A10
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
LI-24