Subaru Legacy 2002 Service Manual page 2860

SPOT LIGHT
Lighting System
26. Spot Light
S914398
A: REMOVAL
S914398A18
1) Disconnect ground cable from battery.
2) Remove lens (A) and spot light mounting screw
(B).
B5M1041A
3) Disconnect harness connectors and remove
spot light.
B: INSTALLATION
S914398A11
Install in the reverse order of removal.
C: INSPECTION
S914398A10
1. SPOT LIGHT BULB
S914398A1001
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. SPOT LIGHT SWITCH
S914398A1002
Measure spot light resistance.
Switch position Terminal No. Standard
OFF — More than 1 MΩ
18±5.4 Ω
ON 1 and 2
LI-29