Subaru Legacy 2002 Service Manual page 2793

Airbag System
2. Airbag Connector
A: OPERATION
1. DRIVER'S AIRBAG, PASSENGER'S
AIRBAG, SIDE AIRBAG, FRONT SUB
SENSOR HARNESS TO AIRBAG MAIN
HARNESS AND PRETENSIONER
¼ How to disconnect:
1) Push lock arm (A).
2) With lock arm (A) pushed in, move slide lock (B)
in the direction of the arrow.
3) With slide lock (B) pulled, remove lock arm (A)
to its original position, and then pull in the direction
of the arrow and separate the connector.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
AIRBAG CONNECTOR
S802659
S802659A16
S802659A1610
B5M1153A
B5M1154
¼ How to connect:
Holding the connector, and push it in carefully until
a connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it locks.
Then pull on it gently to make sure that it is
locked.
2. FRONT SUB-SENSOR, SIDE AIRBAG
SENSOR
S802659A1603
¼ How to disconnect:
1) Holding outer part (A), pull it in the direction of
the arrow.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
AB-8
B5M1155
B5M1156A