Wiper Blade - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Wiper and Washer Systems

4. Wiper Blade

While pushing locking clip (A) up, pull out blade

from arm to arrow direction.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Confirm that clip was locked securely.

C: DISASSEMBLY

Pull on side (A) of the wiper rubber stopper and

remove the rubber from the blade assembly.

1) Insert the wiper rubber onto the blade so that

the stopper is in the position shown (at the bottom

of the wiper arm).

2) Make sure the wiper rubber is securely fas-

tened to the pull stopper (A).

E: INSPECTION

1) When the wiper does not perform well, inspect

the following:

¼ Make sure the movable part of the blade assem-

bly moves smoothly.

¼ Make sure the wiper rubber is not deformed or

2) Replace with a new part if damage is found.

Table of Contents