Subaru Legacy 2002 Service Manual page 2789

Hide thumbs Also See for Legacy 2002:

Table of Contents

Airbag System

¼ Do not drop the airbag modulator parts, subject

them to high temperature over 93°C (199°F), or let

water, oil, or grease get on them; otherwise, the

internal parts may be damaged and reliability

greatly lowered.

¼ If any damage, opening, or rust is found on the

airbag system wire harness, do not attempt to

repair using soldering equipment. Be sure to

replace the faulty harness with a new genuine part.

GENERAL DESCRIPTION

¼ Install the wire harness securely with the speci-

fied clips to avoid interference or tongled up with

other parts.

¼ Do not allow water or oil to come in contact with

the connector terminals. Do not touch the connec-

tor terminals.

¼ Either of the airbag parts, or pretensioner must

not be disassembled.

Chapters

Table of Contents