Subaru Legacy 2002 Service Manual page 2830

8) Install pretensioner on the wheel with the tire.
Then, bundle three wire automotive harness [each
with a sectional area of 1.25 mm
or more], and bind them twofold around the preten-
sioner bracket and the wheel.
9) Put three tires without the wheel on the tire
installed with pretensioner. Put on an additional tire
with the wheel on top, and then fasten them tight
with rope.
10) Move the battery at least 5 m (16 ft) from the
vehicle, and secure the nearby area. Connect the
deployment tool alligator clip to the battery minus
terminal.
DISPOSAL OF PRETENSIONER
2
(0.00194 sq in)
B5M0669
G5M0536
G5M0537
SB-15
11) Connect the other terminal of deployment tool
to the battery plus terminal. Then deploy preten-
sioner.
CAUTION:
¼ After deployment, pretensioner is especially
hot. Leave it unattended for 40 minutes.
¼ Do not let water get on the deployed preten-
sioner.
12) Wrap the deployed pretensioner in an airtight
vinyl bag, and discard it.
Seat Belt System
G5M0531
B5M0500