Subaru Legacy 2002 Service Manual page 2878

7. Front Wiper Motor and Link
S902406
A: REMOVAL
S902406A18
NOTE:
The positions for RHD model are symmetrically
opposite.
1) Remove cowl panel. <Ref. to EI-27, REMOVAL,
Cowl Panel.>
2) Disconnect connector of motor.
3) Loosen bolts and nuts to remove wiper link.
4) Loosen bolts and nuts to remove motor.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) When battery is connected to terminal of
connectors, confirm that motor operates at low
speed.
FRONT WIPER MOTOR AND LINK
B5M1466
B5M1467
S902406A11
S902406A10
B6M1195
2) When battery is connected to terminal of
connectors, confirm that motor operates at high
speed.
3) Connect battery to terminals of connector, and
remove terminal connection with motor rotated at
low speed, and stop wiper motor through opera-
tion.
4) Connect battery and confirm that motor stops at
automatic stop position after motor operates at low
speed again.
WW-13
Wiper and Washer Systems
B6M1196
B6M1197
B6M1198