Subaru Legacy 2002 Service Manual page 2858

24. High-mounted Stop Light
S914425
A: REMOVAL
S914425A18
1. SEDAN
S914425A1804
1) Disconnect ground cable from battery.
2) Disconnect connector of high-mounted stop
light from body harness.
3) Remove bolts, then detach high-mounted stop
light assembly.
2. WAGON
S914425A1803
1) Disconnect ground cable from battery.
2) Remove cap (a) by prying on the edge with a
screwdriver.
3) Remove screws (b) and then detach cover (c).
4) Remove screws (d) and then detach high-
mounted stop light while disconnecting connector.
B: INSTALLATION
Install in the reverse order of removal.
HIGH-MOUNTED STOP LIGHT
B5M0816
B6M1343A
S914425A11
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
LI-27
Lighting System
S914425A10