Subaru Legacy 2002 Service Manual page 2879

Hide thumbs Also See for Legacy 2002:

Table of Contents

Wiper and Washer Systems

8. Front Washer Nozzle

1) Remove the washer hose from the washer

2) Open the clips on the underside of the hood

with a thin screwdriver or other tool, and remove

the washer nozzle.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust the position of the washer liquid sprayer.

<Ref. to WW-14, ADJUSTMENT, Front Washer

C: INSPECTION

¼ Make sure the nozzle and hose are not clogged.

¼ Make sure the hose is not bent.

FRONT WASHER NOZZLE

D: ADJUSTMENT

Adjustment positions for left-handed vehicle. Carry

out left-right symmetry for adjustment positions for

right-handed vehicle.

1) Turn wiper switch to OFF position.

2) When vehicle stops, adjust washer injection

position as shown in the figure.

Injection position:

A: 350 mm (13.78 in)

B: 150 mm (5.91 in)

C: 300 mm (11.81 in)

D: 600 mm (23.62 in)

Chapters

Table of Contents