Subaru Legacy 2002 Service Manual page 2674

DIAGNOSTICS CHART WITH SELECT MONITOR
No.
9 CHECK POOR CONTACT IN CONNEC-
TORS.
Turn ignition switch to OFF.
10 CHECK VDCCM.
1) Connect all connectors.
2) Erase the memory.
3) Perform inspection mode.
4) Read out the diagnostic trouble code.
11 CHECK ANY OTHER DIAGNOSTIC
TROUBLE CODES APPEARANCE.
Step
Is there poor contact in
connector between
VDCH/U, relay box and
VDCCM?
Is the same diagnostic
trouble code as in the cur-
rent diagnosis still being
output?
Are other diagnostic trouble
codes being output?
VDC-215
Check Yes
Repair connector.
Replace VDCCM.
<Ref. to VDC-9,
VDC Control Mod-
ule (VDCCM).>
Proceed with the
diagnosis corre-
sponding to the
diagnostic trouble
code.
VDC (Diagnostics)
No
Go to step 10.
Go to step 11.
A temporary poor
contact.