Subaru Legacy 2002 Service Manual page 2824

B: INSTALLATION
1. OUTER BELT (FRONT)
Install in the reverse order of removal.
CAUTION:
¼ The parts on left and right are not identical.
Before installation, make sure that the correct
part is used.
¼ Be careful not to twist belts during installa-
tion.
2. INNER BELT (FRONT)
Install in the reverse order of removal.
Tightening torque:
Refer to COMPONENT in General
Description. <Ref. to SB-2, FRONT SEAT
BELT, COMPONENT, General Descrip-
tion.>
FRONT SEAT BELT
S801303A11
S801303A1101
S801303A1102
C: INSPECTION
1. OUTER BELT (FRONT)
Check for the following, and replace with new parts
if necessary.
¼ Pretensioner is cracked or deformed.
¼ Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. INNER BELT (FRONT)
Check for the following, and replace with new parts
if necessary.
¼ Inner belt is deformed or damaged.
¼ Seat belt buckle is engaged improperly.
SB-9
Seat Belt System
S801303A10
S801303A1001
S801303A1002