Headlight Bulb - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

12. Headlight Bulb

¼ Because the tungsten halogen bulb operates

at a high temperature, dirt and oil on the bulb

surface reduces the bulb's service life. Hold the

flange portion when replacing the bulb. Never

touch the glass portion.

¼ Do not leave the headlight without a bulb for

a long time. Dust, moisture, etc. entering the

headlight may affect its the performance.

1) Disconnect ground cable from battery.

2) Remove duct (A) (when right side headlight is

3) Remove back cover (A).

4) Disconnect harness connector.

5) Push to remove spring retainer and then detach

headlight bulb.

HEADLIGHT BULB

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1) Visually check the bulb for blow out.

2) Check the bulb specification. <Ref. to LI-2,

SPECIFICATIONS, General Description.>

3) If NG, replace the bulb with a new one.

Lighting System

Table of Contents