Subaru Legacy 2002 Service Manual page 2864

Hide thumbs Also See for Legacy 2002:

Table of Contents

GLOVE BOX LIGHT

Lighting System

30. Glove Box Light

1) Disconnect ground cable from battery.

2) Remove glove box. <Ref. to EI-32, REMOVAL,

3) Disconnect harness connector.

4) Remove glove box light.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1) Visually check the bulb for blow out.

2) Check the bulb specification. <Ref. to LI-2,

SPECIFICATIONS, General Description.>

3) If NG, replace the bulb with a new one.

Chapters

Table of Contents