Subaru Legacy 2002 Service Manual page 1167

Lubrication
C: INSTALLATION
1) Install oil cooler on upper oil pan with connec-
tor pipe.
Tightening torque:
T: 54 N·m (5.5 kgf-m, 39.8 ft-lb)
NOTE:
Always use a new gasket.
(A) Connector
(B) Oil cooler
(C) O-ring
2) Install oil filter using ST. <Ref. to LU(H6)-18,
INSTALLATION, Engine Oil Filter.>
ST 498547000 OIL FILTER WRENCH
3) Install water hose.
OIL COOLER
S148073A11
B2M4552B
B2M4551
B2M4550
LU(H6)-20
4) Install water pipe to engine.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
5) Fill engine oil.
REPLACEMENT, Engine Oil.>
6) Fill engine coolant. <Ref. to CO(H6)-18, FILL-
ING OF ENGINE COOLANT, REPLACEMENT,
Engine Coolant.>
7) Check the engine oil level. <Ref. to LU(H6)-10,
INSPECTION, Engine Oil.>
B2M4549
<Ref. to LU(H6)-10,