Generator - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Starting/Charging Systems

3. Generator

1) Disconnect battery ground cable.

2) Disconnect connector and terminal from gen-

3) Remove V-belt. <Ref. to ME(H6)-29, REMOVE,

4) Remove bolt (A), and loosen bolt (B). Then,

remove generator from bracket.

B: INSTALLATION

Install in the reverse order of removal.

C: DISASSEMBLY

1) Remove the four through bolts. Then insert the

tip of a flat-head screwdriver into the gap between

the stator and front bracket. Pry them apart to dis-

2) Hold rotor with a vise and remove pulley nut.

When holding rotor with vise, insert aluminum

plates or wood pieces on the contact surfaces

of the vise to prevent rotor from damage.

Table of Contents