Subaru Legacy 2002 Service Manual page 1172

2. RHD MODEL
S147001A0502
(1) Accelerator bracket
(2) Stopper
(3) Accelerator pedal lever
(4) Accelerator pedal spring
(5) Accelerator pedal
(6) Spring pin
C: CAUTION
S147001A03
¼ Wear work clothing, including a cap, protective
goggles, and protective shoes during operation.
¼ Remove contamination, including dirt and
corrosion, before removal, installation or disas-
sembly.
¼ Keep the disassembled parts in order and pro-
tect them from dust and dirt.
¼ Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary
removal, installation, disassembly, and replace-
ment.
¼ Be careful not to burn your hands, because each
part in the vehicle is hot after running.
¼ Be sure to tighten fasteners including bolts and
nuts to the specified torque.
¼ Place shop jacks or safety stands at the speci-
fied points.
¼ Before disconnecting electrical connectors of
sensors or units, be sure to disconnect ground
cable from battery.
GENERAL DESCRIPTION
(7) Accelerator spring
(8) Bushing
(9) Clip
(10) Accelerator stopper
(11) Kick-down switch
SP(H6)-3
Speed Control Systems
Tightening torque: N·m (kgf-m, ft-lb)
12 (1.2, 8.7)
T1:
18 (1.8, 13.0)
T2:
B2M4177B