Subaru Legacy 2002 Service Manual page 1196

Hide thumbs Also See for Legacy 2002:

Table of Contents

Assemble in the reverse order of disassembly. Do

the following:

1) Carefully assemble all parts in the order of

assembly and occasionally inspect nothing has

been overlooked.

2) When installing shaft assembly to front bracket,

be careful of the following.

¼ Lever direction

¼ Internal gear position

¼ Packing position

3) When installing yoke to the front bracket, match

4) When installing rear bracket, match brush

holder and yoke's groove.

5) When installing switch assembly, catch plunger

protrusion to lever edge.

6) Apply grease to the following parts during

¼ Front and rear bracket sleeve bearing

¼ Armature shaft gear

¼ Outer periphery of plunger

¼ Mating surface of plunger and lever

¼ Gear shaft splines

¼ Mating surface of lever and clutch

¼ Ball at the armature shaft end

¼ Internal and planetary gears

7) After assembling parts correctly, make sure

starter operates properly.

Starting/Charging Systems

Chapters

Table of Contents